Digital Projection E-Vision Laser 13000 WU Series User Manual

Digital Projection Ltd. E-Vision Laser 13000 WU Series Using the projector
Geometry menu
Geometry
Aspect Ratio Source
Digital Zoom ►
Overscan Off
Blanking ►
Warping Mode Keystone
Keystone ►
4 Corners ►
Rotation ►
Pincushion / Barrel ►
Arc ►
Custom Warp ►
Select a Warping Mode to
activate it. Access its
submenu to adjust the
warping mode settings.
This menu allows you to compensate for image distortions caused by an unusual projection angle or irregular
screen surface.
Aspect ratio
Image scaling and aspect
ratio are also influenced
by Setup > Screen
Setting.
See Theaterscope setting
on the facing page for
further information about
the TheaterScope aspect
ratio.
This feature defines the aspect ratio of the source. Use the Setup > Screen Setting to define the screen aspect ratio.
If you choose a preset aspect ratio from here, it will give you the best fit for your selection.
Choose from:
l 5:4
l 4:3
l 16:10
l 16:9
l 1.88
l 2.35
l TheaterScope
l Source
l Unscaled
Rev A June 2019
page 52
Operating Guide
Notes

Digital Projection E-Vision Laser 13000 WU Series Specifications

General

Brand	Digital Projection
Model	E-Vision Laser 13000 WU Series
Category	Projector
Language	English