Dräger Apollo User Manual

Specifications
Instructions for Use Apollo SW 4.5n 301
Part Number: 9053586, 3rd edition
Latex use
Apollo is not made with natural rubber latex.
8 CTS clear to send
9 NC not connected
Shields DTR and DSR, as well as RTS and CTS are internally connected.
Hardware handshake is not supported.
Settings 1200 or 9600 Baud
even parity
8 data bits
1 stop bit
Dräger Base IV system (not sold in the U.S.) Power supply for IV systems
SpO
2 For connecting an SpO2 sensor
1) Typical delay time of system alarms: 600 ms

Dräger Apollo Specifications

General

Type	Anesthesia Workstation
Gas Supply	O2, N2O, Air
Integrated Monitoring	Yes
Ventilation Modes	Volume Control, Pressure Control, SIMV, Pressure Support, Manual
Vaporizer	Dräger Vapor 2000
Patient Monitoring	ECG, SpO2, NIBP, Temperature
Power Supply	100 – 240 VAC, 50/60 Hz
Tidal Volume Range	20-1500 ml
Vaporizer Mounts	Up to 2