EasyManuals Logo

Dräger Apollo User Manual

Dräger Apollo
310 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #38 background imageLoading...
Page #38 background image
System Components
38 Instructions for Use Apollo SW 4.5n
Part Number: 9053586, 3rd edition
When finishing oxygen therapy, make sure the flow
tube is completely closed:
1. Turn the flow knob (1 in Figure 6) clockwise until
it is completely closed to cut off the oxygen flow.
WARNING!
Risk of patient injury
If the patient is connected to the auxiliary
oxygen outlet without a means of pressure
relief, high pressure will be applied and the
patient endangered.
Do not connect the patient directly to the
auxiliary oxygen outlet without ensuring a
means of pressure relief.

Table of Contents

Other manuals for Dräger Apollo

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dräger Apollo and is the answer not in the manual?

Dräger Apollo Specifications

General IconGeneral
TypeAnesthesia Workstation
Gas SupplyO2, N2O, Air
Integrated MonitoringYes
Ventilation ModesVolume Control, Pressure Control, SIMV, Pressure Support, Manual
VaporizerDräger Vapor 2000
Patient MonitoringECG, SpO2, NIBP, Temperature
Power Supply100 – 240 VAC, 50/60 Hz
Tidal Volume Range20-1500 ml
Vaporizer MountsUp to 2

Related product manuals