205
c HELP Mode Function and Operation Procedures
chap.7
¡ Operation procedure
1.
Enter
“
003
”
by the
NUMERIC
keys and then press the
(PRINT)
key.
a
To exit the HELP mode
: Turn the power switch OFF.
a
To access another HELP mode
:
Enter the desired mode number
using the numeric keys.
Call the HELP mode
“
H-003
”
.
4.
Press the (STOP) key.
The HELP mode selection display will reappear.
Return to the HELP mode.
2.
Press the
(MASTER MAKING)
key to rotate the drum.
Rotate the drum.
(3) Checking Paper Feed/Ejection
Check paper feed/ejection.
2
If paper is present, paper feed/ejection can be checked.
3.
Press the
(TEST PRINT)
key.
If paper is present, paper feed/ejection can be checked.
Check paper feed/ejection.
Press the (STOP) key to stop the drum at the stop position.
¡
If paper is not present or paper jam occurs, only paper feed stops
but the drum continues rotating.
To stop operation, press the (STOP) key.
NOTE :
To Next Page
Loading...
Need help?
General
