206
c HELP Mode Function and Operation Procedures
chap.7
¡ Operation procedure
1.
Enter
“
004
”
by the
NUMERIC
keys and then press the
(PRINT)
key.
Call the HELP mode
“
H-004
”
.
Checking Ink Replenishment
While the ink level is detected, ink is replenished.
2.
Check the following operations.
Check paper feed/ejection.
¡
The drum rotates at the print speed set on the operation panel.
NOTE :
a
To exit the HELP mode
: Turn the power switch OFF.
a
To access another HELP mode
:
Enter the desired mode number
using the numeric keys.
3.
Press the (STOP) key.
The HELP mode selection display will reappear.
Return to the HELP mode.
To Next Page
Loading...
Need help?
General
