Supplying or Changing Paper While Printing
113
Troubleshooting
6.
s
Changing Paper Selection
1
Press (STOP) key. Printing stops.
Take out the paper
3
Remove paper from the “feed tray”. The “feed
tray” will automatically descend.
5
Set “other paper size”.
6
Press (PRINT) key. The “feed tray” will
rise automatically and printing will resume.
Feed tray
descend switch
Side guide
lever
2
Press the “feed tray descend switch”
continuously. Release the “feed tray descend
switch” when the feed tray reaches the proper
height. The feed tray will stop.
"
If the sheet is still in the paper feed roller,
pull it out.
IMPORTANT
:
Paper feed
roller
440235e-e
440235e-c
440235e-d
4
Hold the “side guide lever” and adjust the “side
guide” according to the “other paper size”.
To Next Page
Loading...