Troubleshooting
109
2
Error messages are displayed in one of two ways, either by text or by number.
S
When messages appear
Message Cause and Solution Page
Cause : There is no paper in the feed tray.
Solution : Load the feed tray with printing paper.
16
Cause : There is no ink.
Solution : Replace the old ink pack with a new one.
98
Troubleshooting
6.
Cause : There is no master.
Solution : Replace the master roll with a new one.
100
Cause : The master ejection core is full.
Solution : Dispose of the used master.
102
Cause : There is no drum.
Solution : Install a drum in the machine.
105
Cause : The front cover is open.
Solution : Close the front cover.
99
Cause : The scanner unit is open.
Solution : Close the scanner unit.
101
Cause : A paper jam has occurred in the feed tray side.
Solution : Remove the jammed paper.
114
Cause :
A paper jam has occurred on the print tray side.
Solution :
Inspect the print tray side and remove the
jammed paper.
115
ADD PAPER
CHANGE INK
CHANGE MASTER
CHANGE MASTER EJECTION CORE
NO DRUM
FRONT COVER OPEN
TOP COVER OPEN
PAPER JAM ON THE FEEDER SIDE
PAPER JAM ON THE EJECTION SIDE
Cause : There is an old master on the drum.
Solution : Remove all the masters from the drum.
118
PLATE EJECTION ERROR
To Next Page
Loading...
General