60
Print Speed Adjustment Function
[ Print Speed ]
s
Print Speed Adjustment Function
2
The print speed can be adjusted in 5 steps between 45 pages per minute and 130 pages per minute.
The default setting when the power is turned ON is about 100 pages per minute (standard
speed). However, that when initial settings have been changed in user settings, the print
speed becomes the currently set print speed.
"Paper jams may become more frequent and the paper stacking deteriorate at high and low
speeds with certain types of paper and with certain images. Use the (LOW) and
(HIGH) keys to select the optimum print speed.
"
The prints may be slightly lighter at high print speeds and slightly darker at slow print speeds.
"You can adjust the print speed while the machine is printing.
"You can adjust the print speed with “OPTIMIZE PRINT MODE
”
(
a
see p.88
).
NOTE
:
s
How to Set Print Speed Adjustment Function
1
Press (LOW) or (HIGH) key to adjust
the speed.
2Press (LOW) key a
to decelerate printing. The speed lamp
moves to the left.
2Press (HIGH) key a
to accelerate printing. The speed lamp
moves to the right.
¡
To return to the default setting (about
100 pages per minute)
use one of the following two methods:
"
Press (LOW)or (HIGH) key repeatedly
until the center speed lamp is lit.
"
Press (ALL CLEAR) key. In this case, all
settings are reset to standard mode.
“ Standard mode”
a
see p.10
However, that when initial settings have been
changed in user settings, the print speed
becomes the currently set print speed.
"
Do not press (ALL CLEAR) key while
the machine is printing.
IMPORTANT
:
To Next Page
Loading...
General