50
Deleting the settings [User Settings]
dd
1. JOB SETTING MEMORY
Deleting Settings
s
How to Set Delete
Pressing (CANCEL) key redisplays the main screen.
1
Open the Panel cover.
2
Press (USER SETTING) key.
A list of the user setting is displayed on the
LCD panel.
3
Press “CURSOR” keys to select “1.JOB
SETTING MEMORY”.
4
Press (OK) key.
“1.JOB SETTING MEMORY” is set.
5
Press“CURSOR”keys to select “DELETE”.
6
Press (OK) key. “DELETE” is set.
SELECT AN ITEM WITH
AND PRESS
JOB SETTING MEMORY
RETRIEVE
SAVE
DELETE
CANCEL
SELECT AN ITEM WITH
AND PRESS
USER SETTING
1.JOB SETTING MEMORY
2.INITIAL SETTING
3.OPTIMIZE PRINT
4.DOCUMENT MEMORY
5.DOCUMENT DENSITY DETECTION
6.FEED HEAVY WEIGHT PAPER
7.ONLINE MODE
8.CANCEL
Select
Set
Select
Set
7
Press “CURSOR” keys to select the
“memory NO to delete”.
8
Press (OK) key. The contents of the
selected “memory NO” are deleted.
In all, there are a total of nine memories
"
Currently used memories are prefixed with
the M memory mark. Select a memory not
prefixed with the M mark.
NOTE
:
MEMORY 1
MEMORY 2
MEMORY 3
MEMORY 4
MEMORY 5
MEMORY 6
MEMORY 7
MEMORY 8
MEMORY 9
SELECT AN ITEM WITH
AND PRESS
JOB SETTING MEMORY
RETRIEVE
To Next Page
Loading...
General