102
How to Dispose of Used Masters
s
How to Dispose of Used Masters
The message “CHANGE MASTER EJECTION CORE” is displayed on the LCD panel when the master
ejection core is full.Dispose of used masters wound on to the ejection core by the following procedure.
"
Use only a master ejection core designed for use in this machine.
IMPORTANT
:
s
How to Dispose of Used Masters
Front cover
440210a
1
Open the “front cover”.
2
Pull the “master ejection box release lever” to
pull out the “master ejection box”.
440224
Master ejection
box release lever
Master ejection
box cover
3
Press the “master ejection box cover release
lever” to open the “master ejection box cover”.
Master ejection
box cover release
440225
lever
To Next Page
Loading...
General