56
Batch Printing
dd
Setting the Tape
2Only the specified number of sets is printed with the specified number of prints taken as one
set. Paper tape is inserted when printing of each set is completed. You can enter up to 15
groups of number of prints x number of sets.
Dividing Sections with Tape [ Available only with Tape Cluster Device ]
"The optional tape cluster is required for dividing sections with tape.
When using this function, refer to the Instruction Manual for the “Tape Cluster”.
IMPORTANT
:
s
Caution when Setting the Tape
"
Since the cutter blade is uncovered,
do not touch or keep your fingers away
from it.
WARNING
To Next Page
Loading...
General