52
2Prints are made of specified sets of prints with a specified number of prints to a set.
Up to 15 specified number of prints and sets of prints can be collectively set as a single set.
When the tape cluster (option) is mounted, insert the tape when each set has finished being printed.
Batch Printing
"“Batch Printing” can be selected after platemaking.
"
Set selection of “Batch Printing” and “Sequential Batch Printing” at Special Functions.
a
see p.73
The default setting is “Batch Printing
”
.
IMPORTANT
:
s
How to Set Batch Printing
Pressing (CANCEL) key redisplays the main screen.
2
Using the key pad, enter the number of prints.
Example: 25
¡
If you make a mistake
If you make a mistake, start over again by
press (CLEAR) key and start from the
beginning. When you press (CLEAR) key,
both the number of prints and the number
of sets are cancelled.
¡
Example:
When “2” and “5” are pressed
on the keypad.
w
q
3
Press key.
The current set is displayed on the LCD panel.
Example: 1st set
To Next Page
Loading...
General