Duplo DUPRINTER DP-460e User Manual

66
Fine Start “Operation at Next Platemaking” [ Special Functions ]
s
Fine Start “Startup Time Setting”
This setting forces the machine to operate once under maximum conditions the first time a plate is
made after the drum is replaced, regardless of the elapsed time.
3
Press “CURSOR” keys to select “ 1. FINE START ” .
Each press of “CURSOR” keys moves to a different
item and that item is displayed highlighted.
4
Press (OK) key.
The item selected in step
3 is set.
5
Press“CURSOR” keys to select “ENABLE IN
NEXT JOB".
6
Press (OK) key.
The item selected in step
5 is set.
SELECT AN ITEM WITH
AND PRESS
SPECIAL FUNCTION
1.FINE START OFF
2.AUTO CLEAR OFF
3.PRE-PRINT
0 PRINTS
4.BATCH PRINT BATCH
5.AUTO POWER OFF
OFF
6.AUTO LCD OFF
OFF
7.INK CIRCULATION
8.TAPE CLUSTER
OFF
9.DOUBLE FEED DETECTION OFF
SELECT AN ITEM WITH
AND PRESS
FINE START
AUTO SELECTION
ENABLE IN NEXT JOB
CANCEL
s
How to Set Fine Start “Operation at Next Platemaking”
Pressing (CANCEL) key redisplays the main screen.
1
Open the Panel cover.
2
Press (SPECIAL FUNCTION) key.
The “SPECIAL FUNCTION” is displayed on the
LCD panel.
w
q
Select
Set
Select
Set

Duplo DUPRINTER DP-460e Specifications

General

Brand	Duplo
Model	DUPRINTER DP-460e
Category	Copier
Language	English