When “PLATE EJECTION ERROR” is Displayed
119
6
Return the “Lever” to its original position, and
turn the drum by hand to remove the “master”.
Continue the above steps until the “master” is
removed completely.
Remove
the master
440237b
Troubleshooting
6.
4
Lift up the “drum stopper”, and turn the drum
by hand to set the “Lever” in
5 to an easily
operable position.
Drum stopper
440237
5
Lift the “Lever” toward you.
The “master clamp” opens and the edge of the
“master” will be released from the “master
clamp”. If the “master” is stuck, release it
manually.
440238e
7
Turn the “drum” by hand until the “drum
stopper” fits into the groove.
440237a
Lever
Lever
Master clamp
Master
Lever
Drum stopper
"
Make sure that the peeled paper does not
stick to your clothing.
CAUTION
To Next Page
Loading...
General