43
Multiple Printing on One Page
dd
[ MULTI EXPOSURE ]
s
How to Set Multiple Printing
Pressing (CANCEL) key redisplays the main screen.
2
Open the Panel cover.
3
Press (MULTI EXPOSURE) key.
A list of the multi exposure is displayed on the
LCD panel.
4
Press“CURSOR”keys to select “2” to “16”.
Each press of“CURSOR” keys moves to a
different item that is displayed highlighted.
5
Press (OK) key.
The item selected in step
4 is set.
1
Proceed with steps
1
to
5
of the sequence
described in “ Basic Printmaking”.
“ Basic Printmaking”
a
see p.14
6
Start platemaking and printing.
Proceed with steps
6
to
9
of the sequence
described in “ Basic Printmaking”.
“ Basic Printmaking”
a
see p.14
Printing
3.
w
q
¡
If you reset to Standard (off)
Use one of the following methods.
•
Press the
(MULTI EXPOSURE)
key, then
“CURSOR” keys.
Select “
OFF
” and press
(OK) key. If the initial setting is changed, the
image mode returns to the one you set.
•
Press (ALL CLEAR) key. In this case, all
settings are reset to standard mode.
“ Standard mode”
a
see p.10
(Advanced)
e
Select
r
Set
To Next Page
Loading...