Technical data
108 Operating Instructions 1767 - 00.0 - 12/2016
Characteristics
The machines are equipped with an extra large (XXL) vertical
hook.
The remaining thread length following the thread cutting process
is, respectively, approx. 15 mm and approx. 5 mm without and
with the short thread cutter.
A safety snap-on coupling prevents any misadjustment or damage
to the hook in the event of a thread jamming.
Automatic lubrication system for lubricating the machine and the
hook.
All subclasses are equipped with a bar holding 6 push buttons.
An additional button panel has been placed within easy reach of
the sewer and allows the sewer to assign the same 6 functions of
the buttons housed in the button bar.
To Next Page
Loading...
