Winder
Service Instructions 867-M PREMIUM - 03.0 - 05/2017 67
Setting the winder run
Fig. 55: Setting the winder (4)
To set the winder run:
13. Loosen the threaded pin (13).
14. Set the switch cam (14) such that it is just contacting the leaf spring (15)
when the block (8) has engaged in the locking disk.
15. Set the switch cam (14) such that the winder lever (3) has no axial play.
16. Tighten the threaded pin (13).
Installing the winder
Fig. 56: Setting the winder (5)
To install the winder:
17. Place the winder on the machine arm.
18. Tighten the screws (1).
(8) - Block
(10) - Winder wheel
(12) - Threaded pin
(13) - Threaded pin
(14) - Switch cam
(15) - Leaf spring
(1) - Screws
To Next Page
Loading...
