Programming Commander DELTA
Operating Instructions M-TYPE DELTA - 01.0 - 08/2019 79
Fig. 49: Setting up the user interface (2)
3. Go to Screen configuration (2) and tap on Manual
mode - Main screen configuration (3).
The interface used for configuring the main screen opens.
Fig. 50: Setting up the user interface (3)
4. Tap and hold the desired tile and drag it to move it into or out
of the grid.
5. Tap to return to Settings or to return to Manual mode.
(2) - Screen configuration (3) - Main screen configuration
To Next Page
Loading...
