Programming Commander DELTA
80 Operating Instructions M-TYPE DELTA - 01.0 - 08/2019
Adjusting the information displayed in the status bar
To adjust the appearance of the status bar:
1. Go to Settings (see above).
Fig. 51: Setting up the user interface (4)
2. Go to Screen configuration (4) and tap on Manual
mode - Status bar configuration (5).
The interface used for configuring the status bar opens.
Fig. 52: Setting up the user interface (5)
3. Tap and hold the desired symbol and drag it to move it into
or out of the status bar.
4. Tap to return to Settings or to return to Manual mode.
(4) - Screen configuration (5) - Status bar configuration
To Next Page
Loading...
