DURKOPP ADLER M-Type Delta D867 - Page 95

Programming Commander DELTA
Operating Instructions M-TYPE DELTA - 01.0 - 08/2019 93
Setting options Sewing foot stroke
Menu item Setting 1 Setting 2
linear Sewing foot stroke
Value range 00 – 09 [mm]
Maximum sewing foot
stroke reached at the upper
material thickness limit.
Min. Material
thickness
Value range 00.0 – 10.0 [mm]
Material thickness at which
the increase in sewing foot
stroke should start.
Max. Material
thickness
Value range 00.0 – 10.0 [mm]
Material thickness up to
which the increase in
sewing foot stroke should
occur.
2.OnOff Min. Material
thickness
Value range 00.0 – 10.0 [mm]
Material thickness from
which the 2
nd
sewing foot
stroke should be used.
2.On Min. Material
thickness
Value range 00.0 – 10.0 [mm]
Material thickness from
which the 2
nd
sewing foot
stroke should be used.