Fault
descrip-
tion
Cause Remedy
2500 Actuation of travel lever on
remote control, S 138
0100 = Travel lever shifted forward
0010 = Travel lever not moved
0001 = Travel lever shifted backward
2501 Actuation of steering joystick
on remote control, S 137
0100 = Joystick actuated to the left
0010 = Joystick not moved
0001 = Joystick actuated to the right
2502 Position of switch for vibration,
S 36
0100 = Switch operated to forward, vibration high amplitude
0010 = Switch not operated
0001 = Switch operated to reversed, vibration low amplitude
2503 Position of switch for type of
vibration, S 132
0100 = Switch operated to forward, automatic operation
0010 = Switch not operated, manual operation
2504 Position of switch for fast
speed, S 133
0100 = Switch operated to forward, fast speed selected
0010 = Switch not operated, fast speed disabled
2505 Position of switch for engine
speed, S 134
0100 = Switch operated to forward, high engine speed
0010 = Switch not operated, idle speed
2506 Position of button for horn, S
03
0000 = Button not operated
0001 = Button operated
With the input codes listed above it is possible to
check the transfer of the individual switching sig-
nals from the remote controls to the central control
unit.
For this purpose start the machine and subse-
quently press the horn button to bring the remote
control sender in operating mode for this function
test.
For testing the spiral cable switch the operating
mode switch to cable operation, connect the spiral
cable to the sender and start the machine.
If the engine starts, the spiral cable is OK.
Fault description Cause Remedy
0555 Software Version 3-digit version number
Shows the software version number. 3-digit version number
Checking the function of the
remote controls
System information
Appendix – Input codes for BLM control
D.ONE
186
To Next Page
Loading...
