D 4.6 5
D_4.6_01_GB.fm 5-38
External starting (starting aid)
A
The engine can be started with the help of an external power source if the batteries
are empty and the starter no longer turns.
Suitable power sources are:
- Other vehicles with a 24 V system
- Additional 24 V battery
- Start device that is suitable for external starting (24 V/90 A).
m
Standard chargers or quick chargers cannot be used for external starting.
To externally start the engine:
- Set the drive lever (1) to mid-position
and the speed regulator (2) to mini-
mum.
- Insert ignition switch (3) to position „0“
to turn on the ignition.
- Connect the power source with the ap-
propriate cables.
m
Check the proper polarity! Always con-
nect the minus cable last and remove it
first!
- Press the starter button (4) to start the
engine. Do not let the starter run per-
manently for more than 20 seconds;
allow for a break of 1 minute after eve-
ry attempt!
Element2_konv_Kette_635.bmp/Element3a_konv_Kette_635.bmp
2
3
1
4
To Next Page
Loading...
Need help?
General
