Dynapac F 121 C - Screed Lifting Device; Electrical System

B 17
B_F121C_F141C_02_GB.fm 17-24
5.15 Screed lifting device
5.16 Electrical system
A
For the filling volumes of lubricating and operating agents, see chapter F,
Special functions
At standstill:
- Screed stop
- Screed stop with pretensioning
(max. pressure 50 bar)
During paving:
- Screed charging
- Screed relieving
(max. pressure 50 bar)
Levelling system
Mechanical grade control,
optional systems with and without
slope control
On-board voltage 24 V
Batteries 2 x 12 V, 100 Ah
Alternator (o)
17 kVA / 400 V
20 kVA / 400 V
28 kVA / 400 V
Fuses see chapter F, section 5