D 4.6 9
D_4.6_01_GB.fm 9-38
Loading/distributing material
- Open the hopper with switch (1).
Provide guidance for the truck driver
when tipping the material mix.
- Set the switch (2) of the auger and the
switch (3) of the feeder to „auto“ posi-
tion.
- Set the appropriate auger switch on
the remote control and conveyor
switch (if applicable) to „auto“ position.
- Set the engine speed regulator (4) to
division 10 and push the drive lever (5)
to the second position (about half en-
gine speed).
4
3
5
2
1
Element2_konv_Kette_635.bmp/Element3a_konv_Kette_635.bmp/
Element2_konv_Kette_635.bmp/
To Next Page
Loading...
Need help?
General
