F 6.0 7
F_6.0_01_GB.fm 7-8
Pump distribution gear (4)
- Oil level checking on the viewing
glass (A) (at the side of the distribution
box).
A
The oil level must be up to the center of
the viewing glass.
For filling in the oil:
- Unscrew the filling in screw plug (B).
- Fill in oil through the filling port until the
required filling level is achieved on the
viewing glass (A).
- Return filling screw plug (B).
m
Take care of cleanliness!
Oil change:
Change the oil when the engine is at op-
erating temperature.
- Remove the cover cap of the oil drain
port (C) and screw on the hose provid-
ed as an accessory.
- Place the end of the hose in a dish to
catch the oil.
- Open the shutoff valve with a spanner
and let the oil fully drain.
- Shut off the valve, remove the hose
and return the cover cap.
- Fill in the oil of specified quality
through the filling port on the distribu-
tion box (B) until the oil level rises to
the center of the viewing glass (A).
PVG2.wmf/PVG_Glas.wmf/F0112_A1.bmp
A
B
C
To Next Page
Loading...
Need help?
General
