Dynapac F 121 C - Auger - Drive Gear Neck Bearing (3)

F 4.2 4
F_4.2_01_GB.fm 4-6
Auger - drive gear neck bearing (3)
Remove the hexagonal screw plug (A) in
the neck of the drive. Replace the screw
under it with a grease nipple 10x1. Using
a grease gun press in about 10 strokes
of grease.
A
Thereafter, unscrew the grease nipple
and drive in both screws. The neck of the
drive is sealed downwards and is lubri-
cated with grease only.
F0139_A1.TIF
A