F 9.0 3
F_9.0_01_GB.fm 3-8
1.2 Points of maintenance
Central lubrication (1)
Danger of injuries!
f
Do not reach into the tank when the
pump is running.
f
Operate the central lubrication system
with a mounted safety valve only!
f
During operation do not perform mainte-
nance operations on the safety valve!
f
The lubricant ejected may cause injuries as the equipment operates under high pres-
sure!
f
Make sure that the starting of the diesel engine should be prohibited while work is per-
formed on the equipment!
f
Observe the rules applicable to the operation of the hydraulic equipment!
m
Take care of perfect cleanliness when work is performed on the central lubrication
system.
The lubrication points of the following
units can be provided with grease
through the central lubrication system:
- Feeder
- Auger
- Steering, axles (wheel type paver fin-
isher)
Handverl.jpg/Gefahr.jpg
Lincoln3.jpg
To Next Page
Loading...
Need help?
General
