Dynapac F 121 C User Manual

D 4.6 7
D_4.6_01_GB.fm 7-38
When the hydraulic oil is cold:
- Set the switch (3) of the conveyor to
„manual“ and the switch (4) of the au-
ger to „manual“ (arrow) position.
- Set the speed regulator (5) to medium
RPM and move the drive lever (6), un-
til the conveyor belt and the auger
start operating.
- Let the hydraulics warm up until the in-
dicator lamp goes out.
A
The lamp goes out when the pressure
drops below 2.8 bar = 40 psi.
For further possible malfunctions, refer
to section 4.
Element2_konv_Kette_635.bmp/Element3a_konv_Kette_635.bmp/
5
3
6
4
Element2_konv_Kette_635.bmp/

Dynapac F 121 C Specifications

General

Brand	Dynapac
Model	F 121 C
Category	Construction Equipment
Language	English