C 1.1 7
C_1.1_01_GB.fm 7-14
.
Operation Switch Buttons
- Disabling the interlocking of operation
- Close the hopper halves.
- Engage both hopper transport safe-
guards.
- Lift the screed.
- Insert the transportation safeguards of
the screed.
A
Only when
remote control is not connected
- Turn the preselecting regulator to zero.
- Move the drive lever forward.
- The levelling cylinder are
in fully extended position.
- Set the drive lever to mid-position.
- Retract the screed to the basic width of
the paver finisher.