D 5
D F6C.GB 5-50 0504
Item Designation Brief description
5Starter
Starting is only possible when the driver lever is in the neutral
position. All emergency stop buttons (on the operating panel
and the remote controls) must be pulled out.
6
Traction drive
speed - fast/slow
Hare: transportation speed
Tortoise: operating speed for paving
- Change the speed when the paver finisher is at a standstill!
7 not in use
8
Traction drive
preselector
For setting the maximum speed that can be reached when the
drive lever is at its stop.
The scale roughly matches the speed in m/min (during
paving).
9
Drive lever
(forward - reverse)
For switching on the paver finisher functions and for continu-
ously regulating the traction speed – forward or reverse.
Zero position: starting is possible; no traction; protection
against inadvertent starting.
To move the lever, pull up the ring (9 a).
Depending on the position of the drive lever, the following
functions can be activated:
- 1st position from the central position:Conveyor and auger
on.
- 2nd position from the central position: Screed drive
(tamper/vibration), levelling on; traction drive on; increase
speed to stop.
Use the preselector to set the maximum speed.
10
Auxiliary lighting
(O)
Engagement and disengagement of auxiliary headlights avail-
able on the optional electrical system.
11 not in use
To Next Page
Loading...
