2017.06.19 FwdMan2.8.17.docx 15-129
A standard CAT5 Ethernet patch cable connects the Comapct15 System Controller to a
Remote Control Box (inside the vehicle) which in turn connects with another patch cable to
an IBM compatible PC. These connections are used for normal data collection with the
FwdWin field program.
The Remote Control Box enables the operator to remotely switch on power to the Compact15,
to optional trailer mounted safety Beacons, and it allows for connections of a Park signal.
For diagnostics and setup purposes the COM1 port may be connected through a “NULL-
Modem” cable to a PC running a simple terminal program like Windows Hyperterminal.
The only power source needed to power the Compact15 System Controller is 12VDC (10 to
15VDC).
Key Specifications
Power Requirements:
Voltage: 12VDC nominal, range 10 to 15VDC
Current drain: Approx. 2 Amps. (Not including output power for extern
solenoids etc.)
Ambient Temperature Ranges:
Operating: -20 to 50°C (0 to 120°F)
Storage: -40 to 85°C (-40 to 185°F)
To Next Page
Loading...