Eaton EDR 3000 - Page 229

EDR-3000 IM02602003E
Direct Commands of the Waveform Recorder Module
Parameter Description Setting range Default Menu path
Man. Trigger Manual Trigger False,
True
False [Operation
/Recorders
/Man. Trigger]
Res all rec Reset all records Inactive,
Active
Inactive [Operation
/Reset]
Global Protection Parameters of the Waveform Recorder Module
Parameter Description Setting range Default Menu path
Start: 1 Start recording if the assigned signal is true. 1..n, Assignment
List
Prot.Pickup [Device Para
/Recorders
/Waveform rec]
Start: 2 Start recording if the assigned signal is true. 1..n, Assignment
List
Prot.Trip [Device Para
/Recorders
/Waveform rec]
Start: 3 Start recording if the assigned signal is true. 1..n, Assignment
List
-.- [Device Para
/Recorders
/Waveform rec]
Start: 4 Start recording if the assigned signal is true. 1..n, Assignment
List
-.- [Device Para
/Recorders
/Waveform rec]
Start: 5 Start recording if the assigned signal is true. 1..n, Assignment
List
-.- [Device Para
/Recorders
/Waveform rec]
Start: 6 Start recording if the assigned signal is true. 1..n, Assignment
List
-.- [Device Para
/Recorders
/Waveform rec]
www.eaton.com 217