Eaton EDR 3000 - Page 609

EDR-3000 IM02602003E
Name Description
50R[1].TripCmd Signal: Trip Command
50R[2].Pickup Signal: Pickup IX or IR
50R[2].Trip Signal: Trip
50R[2].TripCmd Signal: Trip Command
51R[1].Pickup Signal: Pickup IX or IR
51R[1].Trip Signal: Trip
51R[1].TripCmd Signal: Trip Command
51R[2].Pickup Signal: Pickup IX or IR
51R[2].Trip Signal: Trip
51R[2].TripCmd Signal: Trip Command
46[1].Pickup Signal: Pickup Negative Sequence
46[1].Trip Signal: Trip
46[1].TripCmd Signal: Trip Command
46[2].Pickup Signal: Pickup Negative Sequence
46[2].Trip Signal: Trip
46[2].TripCmd Signal: Trip Command
ZI.Ground OUT Signal: Zone Interlocking Ground OUT
ZI.Ground Pickup Signal: Zone Interlocking Ground Pickup
ZI.Ground Trip Signal: Zone Interlocking Ground Trip
ZI.IN Signal: Zone Interlocking IN
ZI.OUT Signal: Zone Interlocking OUT
ZI.Phase OUT Signal: Zone Interlocking Phase OUT
ZI.Phase Pickup Signal: Zone Interlocking Phase Pickup
ZI.Phase Trip Signal: Zone Interlocking Phase Trip
ZI.Pickup Signal: Pickup Zone Interlocking
ZI.Trip Signal: Zone Interlocking Trip
ZI.TripCmd Signal: Zone Interlocking Trip Command
SOTF.Active Signal: Active
SOTF.enabled Signal: Switch Onto Fault enabled. This Signal can be used to modify Overcurrent Protection Settings.
SOTF.I< Signal: No Load Current.
CLPU.detected Signal: Cold Load detected
CLPU.enabled Signal: Cold Load enabled
CLPU.ExBlo Signal: External Blocking
CLPU.ExBlo1-I Module Input State: External Blocking
CLPU.ExBlo2-I Module Input State: External Blocking
CLPU.I< Signal: No Load Current.
CLPU.Load Inrush Signal: Load Inrush
www.eaton.com 597