Eaton EDR 3000 - Page 610

EDR-3000 IM02602003E
Name Description
CLPU.Settle Time Signal: Settle Time
ExP[1].Alarm Signal: Alarm
ExP[1].Trip Signal: Trip
ExP[1].TripCmd Signal: Trip Command
ExP[2].Alarm Signal: Alarm
ExP[2].Trip Signal: Trip
ExP[2].TripCmd Signal: Trip Command
ExP[3].Alarm Signal: Alarm
ExP[3].Trip Signal: Trip
ExP[3].TripCmd Signal: Trip Command
ExP[4].Alarm Signal: Alarm
ExP[4].Trip Signal: Trip
ExP[4].TripCmd Signal: Trip Command
BF.Lockout Signal: Lockout
BF.Pickup Signal: BF-Module Started (Pickup)
BF.Trip Signal: Breaker Failure Trip
TCM.Not Possible Not possible because no state indicator assigned to the breaker.
TCM.Pickup Signal: Pickup Trip Circuit Supervision
CTS.Pickup Signal: Pickup Current Transformer Measuring Circuit Supervision
AR.Blo Signal: Auto Reclosure is blocked
AR.failed Signal: Auto Reclosing Failure
AR.Lock Signal: Auto Reclosure is locked out
AR.Pre Shot Pre Shot Control
AR.Ready Signal: Ready to shoot
AR.Running Signal: Auto Reclosing Running
AR.Standby Signal: Standby
AR.successful Signal: Auto Reclosing successful
SysA.Alm Current Demd Signal: Alarm Current demand value
SysA.Alarm I THD Signal: Alarm Total Harmonic Distortion Current
SysA.Trip Current Demand Signal: Trip Current demand value
SysA.Trip I THD Signal: Trip Total Harmonic Distortion Current
Wired Inputs.52a M1-I State of the module input: Main 1 Breaker Closed
Wired Inputs.52b M1-I State of the module input: Main 1 Breaker Open
Wired Inputs.TOCa M1-I State of the module input: Main 1 Breaker Connected
Wired Inputs.43/10 M1-I State of the module input: Main 1 Breaker Selected To Trip
Wired Inputs.52a M2-I State of the module input: Main 2 Breaker Closed
Wired Inputs.52b M2-I State of the module input: Main 2 Breaker Open
www.eaton.com 598