EDR-3000 IM02602003E
Name Description
AR. 2 Abort the AR-cycle, if the state of the assigned signal is true. If the state of this function is true the AR will be
aborted.
AR. 3 Abort the AR-cycle, if the state of the assigned signal is true. If the state of this function is true the AR will be
aborted.
AR. 4 Abort the AR-cycle, if the state of the assigned signal is true. If the state of this function is true the AR will be
aborted.
AR. 5 Abort the AR-cycle, if the state of the assigned signal is true. If the state of this function is true the AR will be
aborted.
AR. 6 Abort the AR-cycle, if the state of the assigned signal is true. If the state of this function is true the AR will be
aborted.
SysA.Active Signal: Active
SysA.ExBlo Signal: External Blocking
SysA.Alm Current Demd Signal: Alarm Current demand value
SysA.Alarm I THD Signal: Alarm Total Harmonic Distortion Current
SysA.Trip Current Demand Signal: Trip Current demand value
SysA.Trip I THD Signal: Trip Total Harmonic Distortion Current
SysA.ExBlo-I Module Input State: External Blocking
Wired Inputs.Bkr Trouble-I Breaker Trouble
Wired Inputs.52a M1-I State of the module input: Main 1 Breaker Closed
Wired Inputs.52b M1-I State of the module input: Main 1 Breaker Open
Wired Inputs.TOCa M1-I State of the module input: Main 1 Breaker Connected
Wired Inputs.43/10 M1-I State of the module input: Main 1 Breaker Selected To Trip
Wired Inputs.52a M2-I State of the module input: Main 2 Breaker Closed
Wired Inputs.52b M2-I State of the module input: Main 2 Breaker Open
Wired Inputs.TOCa M2-I State of the module input: Main 2 Breaker Connected
Wired Inputs.43/10 M2-I State of the module input: Main 2 Breaker Selected To Trip
Wired Inputs.52a T-I State of the module input: Tie Breaker Closed
Wired Inputs.52b T-I State of the module input: Tie Breaker Open
Wired Inputs.TOCa T-I State of the module input: Tie Breaker Connected
Wired Inputs.43/10 T-I State of the module input: Tie Breaker Selected To Trip
Wired Inputs.43 M-I State of the module input: System In Manual
Wired Inputs.43 A-I State of the module input: System in Auto
Wired Inputs.43 P1-I State of the module input: Preferred Source 1
Wired Inputs.43 P2-I State of the module input: Preferred Source 2
DI-4P X1.DI 1 Signal: Digital Input
DI-4P X1.DI 2 Signal: Digital Input
DI-4P X1.DI 3 Signal: Digital Input
DI-4P X1.DI 4 Signal: Digital Input
DI-8P X1.DI 1 Signal: Digital Input
www.eaton.com 720
To Next Page
Loading...
