Eaton PowerXL Series - Table 172. Connection Object, Class 0 X05

139
Hardware specifi cation
POWERXL SERIES VFD MN040010EN—June 2018 www.eaton.com
Connection object, class 0x05
Table 172. Connection object, class 0x05
Object descriptions
Class attributes
ID Description NV Data type Access rule Default Range
1Revision NV UINT Get 1

1
Class services
ID Service Requirements
0Eh Get_attribute_single
Instance attribute
ID Description NV Data type Access rule Default Range
1State USINT Get
2 Instance type USINT Get
3Transport class trigger BYTE Get
4 Produced connection id UINT Get
5 Consumed connection id UINT Get
6 Initial comm characteristics BYTE Get
7 Produced connection size UINT Get
8 Consumed connection size UINT Get
9 Expected packet rate UINT Get/Set
12 Watchdog timeout action USINT Get/Set
13 Produced connection path length UINT Get
14 Produced connection path Packed EPATH Get
15 Consumed connection path length UINT Get
16 Consumed connection path Packed EPATH Get
Instance services
ID Service
0Eh Get_attribute_single
10h Set_attribute_single

Default values as per stack.