Eaton PowerXL Series - Table 74. Vendor Specific Objects

60
EtherNet/IP On-Board Communications
POWERXL SERIES VFD MN040010EN—June 2018 www.eaton.com
Vendor parameters object, class 0xA0, 0xA1, 0xA2, 0xA3, 0xA4 and 0xA5
PowerXL DG1 Series shall support Vendor Parameters Object, Class 0xA0, 0xA1, 0xA2, 0xA3,
0xA4 and 0xA5 as given in table below.
Vendor parameter object is used in order to get access to drive parameters.
Please refer to Appendix A for Class, Instance, and Attribute values for each parameter.
Table 74. Vendor specific objects
ID Description Data type Access rule Remarks/default
Class attributes
01h Revision UINT Get 1
02h Max instance UINT Get 1
03h Number of instances UINT Get Varies for different objects
Class services
0Eh Get_attribute_single
Instance attributes
Varies for different objects
Instance services
0Eh Get_attribute_single
10h Set_attribute_single
ote: N All the drive parameters given in the application
manual are accessible using the vendor parameter
object. See Appendix A for instance values.