Eaton PowerXL Series - Table 179. Base Device Information Object

146
Hardware specifi cation
POWERXL SERIES VFD MN040010EN—June 2018 www.eaton.com
Base device information object, class 0x96
Base device Information Object is used in order to get information about the Base Device to
which this option card is connected.
Table 179. Base device information object
Object descriptions
Class attributes
ID Description NV Data type Access rule Default/Remark
01h Revision NV UINT Get 1
02h Max instance NV UINT Get 1
03h Number of instances NV UINT Get 1
Class services
ID Service
0Eh Get_attribute_single
Instance attribute
ID Description NV Data type Access rule
01h Product name NV SHORT_STRING Get “PowerXL DG1”
02h Firmware revision NV Struct of: Get
Major revision USINT As read from device
Minor revision USINT
03h Hardware version NV USINT Get 0xXX
04h Product code NV UINT Get 0x3000
05h Serial number NV UDINT Get Runtime = Read
from the board
Instance services
ID Service
0Eh Get_attribute_single