Eaton PowerXL Series - Table 68. TCP;IP Interface Object

53
EtherNet/IP On-Board Communications
POWERXL SERIES VFD MN040010EN—June 2018 www.eaton.com
TCP/IP interface object, class 0XF5
The TCP/IP interface object provides the mechanism to configure a device’s TCP/IP
network interface. Examples of configurable items include the device’s IP Address,
Network Mask, and Gateway Address.
Table 68. TCP/IP interface object
ID Description Data type Access rule Remarks/Default values
Class attributes
01h Revision UINT Get 3
02h Max instance UINT Get 1
03h Number of instances UINT Get 1
04h Optional attribute list Array of UINT Get 0x04 0x00 0x08 0x00 0x09 0x00 0x0A 0x00
0x0B 0x00
06h Maximum ID class attribute UINT Get 7
07h Maximum ID instance attribute UINT Get 0x0B
Class services
01h Get_attributes_all
0Eh Get_attribute_single
Instance attributes
01h Status DWORD Get 01
02h Configuration capability DWORD Get 0xD4
03h Configuration control DWORD Get/Set

02-dhcp, 0- static
04h Physical link STRUCT of Get
Path size UINT 00
Path Padded EPATH 00
05h Interface configuration Struct of:-NV Get/Set

Ip address UDINT 192.168.1.254
Network mask UDINT 255.255.255.0
Gateway address UDINT 192.168.1.1
Name server UDINT 00
Name server 2 UDINT 00
Domain name STRING 00
06h Host name STRING Get/Set

00
08h TTL value USINT Get 01
09h Multicast configuration Struct of Get
Alloc control USINT 00
Reserved USINT 00
Number of mcast UINT 0x20
Starting multicast address DWORD 0xA0 0x20 0xC0 0xEF
0Ah Select ACD BOOL Get/Set

1
0Bh Last conflict detected Struct of Get/Set

ACD activity USINT 0
Remote MAC Array of 6 USINT 00
ARP PDU Array of28 USINT 00
Instance services
01h Get_attributes_all
0Eh Get_attribute_single
10h Set_attribute_single

Set service is applicable only in Static IP addressing Mode. ote: N Attribute configuration control supports only value 0
(device is using configuration values that are stored
in non-volatile memory). Attribute host name is used
just for information purposes.