Eaton PowerXL Series - Table 200. Supported Object Types and Properties Summary

173
Commissioning
POWERXL SERIES VFD MN040010EN—June 2018 www.eaton.com
Table 200. Supported object types and properties summary
Property
Device
object type
Analog input
object type
Analog value
object type
Binary value
object type
Multiple state
value object type
Acked_Transitions
Active_Cov_Subscriptions
Active_Text
■
Active_Vt_Sessions
Alarm_Value
Alarm_Values
Align_Intervals
Apdu_Segment_Timeout
Apdu_Timeout
■
Application_Software_Version
■
Auto_Slave_Discovery
Backup_And_Restore_State
Backup_Failure_Timeout
Backup_Preparation_Time
Change_Of_State_Count
Change_Of_State_Time
Configuration_Files
Cov_Increment
Database_Revision
■
Daylight_Savings_Status
Deadband
Description
■■■■■
Device_Address_Binding
■
Device_Type
Elapsed_Active_Time
Event_Algorithm_Inhibit
Event_Algorithm_Inhibit_Ref
Event_Detection_Enable
Event_Enable
Event_Message_Texts
Event_Message_Texts_Config
Event_State
■■■■
Event_Time_Stamps
Fault_Values
Firmware_Revision
■
High_Limit
Inactive_Text
■
Interval_Offset
Last_Restart_Reason
Last_Restore_Time
Limit_Enable
Local_Date
Local_Time
Location
Low_Limit
Manual_Slave_Address_Binding
Max_Apdu_Length_Accepted
■
Max_Pres_Value
Max_Segments_Accepted