Eaton PowerXL Series - Figure 60. Connection of Smartwire-DT Module to Powerxl DG1 Drive

151
SmartWire-DT External Communication Cards
POWERXL SERIES VFD MN040010EN—June 2018 www.eaton.com
Connection of SmartWire-DT module to drive
SmartWire-DT “DXG-NET-SWD-IP20” &
“DXG-NET-SWD-IP54” modules are attached to PowerXL
DG1 drive at the bottom cable insert area as shown below.
Figure 60. Connection of SmartWire-DT module to PowerXL DG1 Drive
SMARTWIRE-DT module shall connect to the PowerXL DG1 main unit
using the Modbus RTU field bus on the drive control board as marked
inthe above pictures
Modbus
Cable
Modbus
Cable