Eaton PowerXL Series - Table 202. Analog Value Object Instance Summary

176
Commissioning
POWERXL SERIES VFD MN040010EN—June 2018 www.eaton.com
Analog value object instance summary
The following table summarizes the Analog Value Objects supported.
Table 202. Analog value object instance summary
Instance
ID Object name Description Units
Preset
value access
AV0
Speed Reference Motor speed reference from network Percent C
AV1
Current Limit Current Limit Amps W
AV2
Min Frequency Minimum Frequency Hz W
AV3
Maximum Frequency Maximum Frequency Hz W
AV4
Accel Time 1 Acceleration Time seconds W
AV5
Decel Time 1 Deceleration Time seconds W
AV6
AnyParam ID Parameter ID number to be accessed No Units W
AV7
AnyParam Value Value of parameter defined by AV6 No Units W
AV8
Process Data In 1 Fieldbus Process Data In 1 N/A C
AV9
Process Data In 2 Fieldbus Process Data In 2 N/A C
AV10
Process Data In 3 Fieldbus Process Data In 3 N/A C
AV11
Process Data In 4 Fieldbus Process Data In 4 N/A C
AV12
Process Data In 5 Fieldbus Process Data In 5 N/A C
AV13
Process Data In 6 Fieldbus Process Data In 6 N/A C
AV14
Process Data In 7 Fieldbus Process Data In 7 N/A C
AV15
Process Data In 8 Fieldbus Process Data In 8 N/A C
ote: N For Present Value Access Types, W = Writeable, C = Commandable.
Commandable values support priority arrays and relinquish defaults.