Eaton PowerXL Series - Figure 20. DH1 Static IP Address

24
Modbus TCP On-Board communications
POWERXL SERIES VFD MN040010EN—June 2018 www.eaton.com
Figure 20. DH1 Static IP address
b. Setting Static Subnet Mask
c. Setting Static Default Gateway
d. Setting Modbus TCP Unit ID
3. Make note of the changed IP Address.
4. Using drive keypad, read “Active IP Address”,
“ActiveSubnet Mask”, “Active Default Gateway”
parameters to ensure that IP address has been
settodesired IP address.