43
EtherNet/IP On-Board Communications
POWERXL SERIES VFD MN040010EN—June 2018 www.eaton.com
After selecting “PowerXL DG1,” “New Module” window will pop-up (as shown below).
Fill in unique name and appropriate IP address for device. Press OK. The device will get
added under “Ethernet” module.
ote: N You must change the class1 connection from provided default option by using
“Change” button available on “New Module” window. This can also be done
after adding the device under Ethernet by double-clicking on it.
To Next Page
Loading...
