Eaton PowerXL Series - Page 99

75
BACnet MS/TP—On-Board Communication
POWERXL SERIES VFD MN040010EN—June 2018 www.eaton.com
Table 91. Supported object types and properties summery, continued
Property
Device
object type
Analog input
object type
Analog value
object type
Binary value
object type
Multiple state
value object
type
Location
Low_Limit
Manual_Slave_Address_Binding
Max_Apdu_Length_Accepted X
Max_Info_Frames X
Max_Master X
Max_Pres_Value
Max_Segments_Accepted
Min_Pres_Value
Minimum_Off_Time
Minimum_On_Time
Model_Name X
Notification_Class
Notify_Type
Number_Of_Apdu_Retries X
Number_Of_States X
Object_Identifier XXXXX
Object_List X
Object_Name XXXXX
Object_Type XXXXX
Out_Of_Service XXXX
Password

X
Present_Value XXXX
Priority_array XX
Profile_Name X
Protocol_Object_Types_supported X
Protocol_Revision X
Protocol_Services_Supported X
Protocol_Version X
Reliability
Reliability_Evaluation_Inhibit
Relinquish_Default X X
Resolution
Restart_Notification_Recipients
Restore_Completion_Time
Restore_Preparation_Time

Password is a vendor specific property added to device object with property
identifier as 600. Default value of password is empty string; this is a writable
property with max length of 20, it always returns ***** on read. Same password
will be used for Reinitialize Device Service and Device communication Control service.