Packaging and shipping
If possible, use the original box to return the device.
Ecolab assumes no liability for transport damage.
1. Print and sign the return form.
2. Pack the product to be returned without any accessories, unless they may be related
to the error
.
Make sure that the original serial number label is present on all products
that are returned.
3. Enclose the following documents with the consignment:
n Signed return form
n Copy of the order confirmation or delivery note
n In the case of a warranty claim: Invoice copy with date of purchase
n Safety data sheet for hazardous chemicals
The return form must be affixed in a clearly visible position on the
outside
of the package using a delivery note bag.
4. Copy the return address with return number to the shipping label.
1.6 Packaging
The packages are packaged according to the expected transport conditions. The
packaging is designed to protect the individual components up to assembly against
shipping damage, corrosion and other damage.
Therefore, do not destroy the packaging and only remove it just before assembly
.
ENVIRONMENT!
Risk of environmental damage due to incorrect disposal!
Only environment-friendly materials were used for the packaging. Packaging
materials are valuable raw materials and can, in many cases, be used again,
be processed or recycled.
Incorrect disposal of packaging materials can be a threat to the
environment.
–
Observe the locally applicable disposal regulations!
– Environmentally-friendly disposal of packaging materials.
– If necessary, hire a specialist to carry out disposal.
General
12Ver. 08-04.2024
To Next Page
Loading...
