7.3.6 Failure of the power supply
The plant is put into a safe operating condition when the power supply fails.
The plant will also be in a safe operating condition following a restart of the
control unit.
1. Press the illuminated button on the control cabinet.
ð
The message text on the control panel disappears.
ð
The DryExx
®
system will begin to operate as soon as an external enable is
present and a spraying phase is active.
2. If necessary
, reset the control unit of a higher-level system.
Commissioning / operation
51 Ver. 08-04.2024
To Next Page
Loading...
