Dirt is easier to see when the device is switched off, and it avoids settings
being changed unintentionally as a result of the cleaning action.
1. Rub the microfibre cloth over the control panel in small circular movements.
2. For stubborn dirt, dampen a cotton cloth with distilled water and clean the control
panel again.
3. Finally
, rub it once again with the microfibre cloth until no visible dirt remains.
ENVIRONMENT!
Risk of environmental damage due to incorrect disposal.
Incorrect disposal can be a threat to the environment:
–
Detergents and accessories (brushes, cloths, etc.) must be disposed of in
compliance with local regulations and with due regard for the information
displayed on cleaning containers and on the safety data sheets from the
manufacturer.
10.2.2 Clean the outside of the control cabinet
Personnel:
n
Operator
Protective equipment:
n
Protective eyewear
n
Protective gloves
Requirements:
n Switch off the system and secure against being switched back on.
1. Make sure the control cabinet is attached securely and check for missing stickers
and damage.
2. Wipe down the outside of the control cabinet with a dry cloth.
3. Wipe down the touch screen of the control unit with a dry microfibre cloth.
4. Check the vicinity of the control cabinet or system for any dirt and clean if necessary
.
Maintenance
93 Ver. 08-04.2024
To Next Page
Loading...
