10 Maintenance
Personnel:
n
Operator
n
Qualified electrician
n
Mechanic
n
Service personnel
Protective equipment:
n
Protective eyewear
n
Protective gloves
n
Safety shoes
CAUTION!
Electrical repairs may only be carried out by qualified electricians in
accordance with the applicable CE directives. Furthermore, the respective
regulations of the countries as well as local
EVU regulations must be observed!
Live parts may be exposed when opening covers or removing parts
(apart from covers that can be opened or parts that can be removed without
using tools). Connection points may also be live.
Before repairing, servicing, repairing or replacing any part, the unit must be
disconnected from all power sources when opening the unit is necessary.
In order to protect the personnel entrusted with maintenance from electric
current, unintentional reconnection must be prevented by suitable measures
during all work on the system!
WARNING!
Risk of injury from automatically starting components
With some components, an automatic start-up is already started as soon as
the power supply is connected or restored after a power failure. This is done
without first actuating a switch or button and can lead to injuries.
– Make sure that there are no persons in the danger zone.
–
Ensure operational readiness before connecting the power supply.
– Take suitable higher-level measures to prevent an automatic restart after a
power failure.
Maintenance
90Ver. 08-04.2024
To Next Page
