The following information and settings can be viewed/edited:
- Back to ‘Home screen
’
Ä
Chapter 8.1 ‘Home screen’ on page 52
[time] - The ‘Date/Time’ screen appears.
Ä
Chapter 8.3.1 ‘Set the date/time’ on page 58
[setup] - Make the Setup settings.
Ä
Chapter 8.3.2 ‘Configure the system’ on page 59
[signals] - Check the inputs and outputs and activate manually
Ä
Chapter 8.3.3 ‘Check signals’ on page 63
[language/
Sprache
]
- Set the control language
Ä
Chapter 8.3.4 ‘Setting the display language ’ on page 67
[password] - Assign PIN codes for user levels
Ä
Chapter 8.3.5 ‘Issue PIN codes’ on page 68
[windows level]/ - Start the operating system level of the control unit.
[start up] - Delete valve assignment and/or consumption logs
Ä
Chapter 8.3.6 ‘Resetting the control unit to factory settings’
on page 70
[Return] - Back to ‘Home screen’
Ä
Chapter 8.1 ‘Home screen’ on page 52
Software description
57 Ver. 08-04.2024
To Next Page
Loading...
